Cli Command Description - Advantech WISE-1510 User Manual

5.1

CLI Command Description

The parameters settings on WISE-3610 and WISE-1510 need to be the same.
Before you had your own solution on WISELink, you can try to change the WISELink
solution via CLI command.
There are 13 parameters to establish the WISE-3610 and WISE-1510 links which
includes Beacon(DevOpMode), Device EUI(DevEUI), App EUI(AppEUI), App
Key(AppKey), Device Class(Devclass), Activation(DevActMode), App Key(AppKey),
NetWork ID(DevNetID),
quency(DevAdvwiseFreq), Device Address(DevAddr), Network Session Key(NwkS-
Key) and Application Session Key(AppSKey).
In this section, we will guide you to do the settings with each solution which are
WISELink 1.0 with Class A ABP, WISELink 1.0 with Class C ABP, WISELink 2.0 with
Class A OTAA and WISELink 2.0 with Class C OTAA. Each solution needs to adjust
some parameters both on WISE-1510 and WISE-3610. Please check the following
table for the detail parameter description.
Command Option
node get/set
savecfg
reboot
Example 1
Example 2
Example 3
Example 4
WISE-1510 User Manual
Data Rate(DevAdvwiseDataRate),
Parameters
--AppEUI
--BKey
--AppKey
--DevAddr
--NwkSKey
--AppSKey
--DevNetId
--DevActMode
--DevOpMode
--DevAdvwiseFreq
--DevAdvwiseDataRate
--DevAdvwiseTxPwr
Command example
node get --AppEUI
node set --DevAddr 11111111
node savecfg
node reboot
34
Channel
Description
Application EUI for OTAA mode
Broadcast key
Application key for OTAA mode (16
Digit)
Device Addr for ABP mode
Network session key for ABP mode
(32 Digit)
Application session key for ABP
mode (32 Digit)
Device Net ID for WISE mode
Activation mode
(1:OTAA| 2:ABP; Default:1)
Device operating mode
(1:WISELink 1.0 | 2:LoRaWAN |
4:WISELink 2.0; Default:4)
Frequency Band
Data Rate
RF Transmit Power (dbm)
Save all changes to the WISE-1510
Reboot WISE-1510
Description
Get AppEUI parameter
Set DevAddr is 11111111
Save all changes to the WISE-1510
Reboot WISE-1510
Fre-