Step 2. Attaching the Optional Guide Assembly (70) and Optional Guide T Assembly (70)
1. Attach the optional guide assembly (70) to the position from which the roller guide shaft S3 (35) was
removed.
2. Attach the optional guide T assembly (70) using hexagon cap screw (4 x 10), spring washer (SW4)
and washer (W4) from inside of the unit to the position from which the roller guide shaft T1 (35) was
removed.
Optional guide assembly (70)
DFP-R3000
Optional guide T assembly (70)
Hexagon
cap screw
4 x 10
SW4
W4
1-5 (E)