Installing To Simplex 35 (Strong International) - Sony DFP-R3000 Installation Manual

5-2-1. Installing to SIMPLEX 35 (Strong International)

1. Installing Example 1 (Using adapter (A))
Required Parts
Part Name
Adapter (A)
Optional guide (E)
Adapter (C)
Hexagon cap screw (3/8-16)
Wave washer
Hexagon cap screw (3/8-16)
Hexagon cap screw (M4 x 12)
Spring washer (SW4 TYPE2)
Washer (W4, MID)
Procedure
Step 1. Installing the Adapter (A) to the Projector
1. Remove REEL ARM or platter guide roller of supply
reel side of the projector.
2. Install the two optional guides (E) to the adapter (C).
3. Attach the adapter (C) to the projector using the two
hexagon cap screws (3/8-16) 1.
4. Attach the adapter (A) tentatively to the adapter (C)
using the two hexagon cap screws (3/8-16) 2 and
wave washers.
n
Fixing hole of adapter (A) varies depending on the
projector to be used. (See the figure below.)
5. Attach the path adjustment tool tentatively to the
adapter (A) with the two hexagon cap screws (M4 x
12) 3, two washers (W4) and two spring washers
(SW4) as shown in the figure.
1-8 (E)
Q'ty Sony Part No.
1 —
2 X-3168-154-1
1 3-200-390-02
2 3-185-981-01
2 —
2 —
4 —
4 —
4 —
2
Hexagon cap screw (3/8-16)
Wave washer
Spring washer
3 Hexagon cap screw
1
Optional guide (E)
Remark
Supplied with DFP-R3000
Supplied with DFP-R3000
For attaching adapter (C)
Supplied with DFP-R3000
For attaching adapter (A)
Supplied with DFP-R3000
For attaching adapter (A)
Supplied with DFP-R3000
For attaching Path adjustment tool and
DFP-3000
Supplied with DFP-R3000
For attaching Path adjustment tool and
DFP-R3000
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-R3000
Path adjustment tool
Washer (W4)
(SW4)
(M4 x 12)
Hexagon cap screw
1
(3/8-16)
3
Hexagon cap screw
(M4 x 12)
2
Spring washer
(SW4)
Washer (W4)
Adapter (A)
Adapter (C)
Projector
SIMPLEX 35
DFP-R3000