Installing To Simplex 70 - Sony DFP-R3000 Installation Manual

5-2-2. Installing to SIMPLEX 70

Required Parts
Part Name
Adapter (A)
Hexagon cap screw (3/8-16)
Wave washer
Optional guide (70 mm)
Adapter (C)
Hexagon cap screw (3/8-16)
Hexagon cap screw (M4 x 12)
Spring washer (SW4 TYPE2)
Washer (W4, MID)
Procedure
Step 1. Installing the Adapter (A) to the Projector
1. Remove REEL ARM or platter guide roller of supply
reel side of the projector.
2. Attach the optional guide (70 mm) to the adapter (C).
3. Attach the adapter (C) tentatively to the projector
using the two hexagon cap screws (3/8-16) 1.
4. Put a film on the optional guide (70 mm) from the
projector, and adjust the attaching position of the
adapter (C) so that the film is smoothly fed onto the
projector.
Especially adjust so that the tension on both edges of
the film is even.
5. After the adjustment has been completed, tighten the
two hexagon cap screws (3/8-16) 1.
6. Attach the adapter (A) tentatively to the adapter (C)
using the two hexagon cap screws (3/8-16) 2 and
wave washers (d = 10).
n
Fixing hole of adapter (A) varies depending on the
projector to be used. (See the figure below.)
7. Attach the path adjustment tool tentatively to the
adapter (A) with the two hexagon cap screws (M4 x
12) 3, two washers (W4) and two spring washers
(SW4) as shown in the figure.
DFP-R3000
Q'ty Sony Part No.
1 —
2 —
2 —
1 X-3168-154-1
1 3-200-390-02
2 3-185-981-01
4 —
4 —
4 —
2 Hexagon cap screw
1
Hexagon cap screw
(3/8-16)
Optional guide (70mm)
Remark
Supplied with DFP-R3000
Supplied with DFP-R3000
For attaching adapter (A)
Supplied with DFP-R3000
For attaching adapter (A)
For attaching adapter (C)
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-3000
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-R3000
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-R3000
Path adjustment tool
(3/8-16)
2
Wave washer
1
Washer (W4)
Spring washer (SW4)
3 Hexagon cap screw (M4 x 12)
Projector
SIMPLEX 70
3
Hexagon cap screw
(M4 x 12)
Spring washer
(SW4)
Washer (W4)
Adapter (A)
Adapter (C)
1-13 (E)