Installation To The Projector - Sony DFP-R3000 Installation Manual

5-2.

Installation to the Projector

Notes on Installation
. Place the DFP-R3000 in the upright position (not
sideways nor tilted) and position the reader (part of the
drum where the LEDs are located) of the DFP-R3000
more than 32 frames but within 119 frames from the
picture gate of the projector.
However the film speed must be stable (within ± 5 %)
when the first image frame passes by the reader of the
DFP-R3000.
. The tension of the film that is supplied to the DFP-
R3000 during film running is set to 0.5 to 59 N (50 to
600 fg).
Adjust so that the tension is within the above range
between the beginning and end of the supplied film.
Required Tools
Path adjustment tool (Sony part No. J-6510-220-A)
35 mm Film
Phillips screwdriver
Nut driver (d = 5 mm)
Hexagon screwdriver (across ; 3 mm)
DFP-R3000
1-7 (E)