Sony DFP-R3000 Installation Manual page 8

Procedure
Step 1. Removing the Front Panel, Guide Rollers S3 and T1 and etc.
1. Remove the two screws (B3 x 4) a and four screws (B2.6 x 6) b to remove the right side panel.
2. Remove the two screws (B3 x 4) c and four screws (B2.6 x 6) d.
3. While holding the roller guide S2 to the direction of the arrow, remove the front panel assembly.
4. Remove the two escutcheons to the direction of the arrow.
5. Remove the one screw (RK4 x 8), ornamental washer and washer to take out the roller guide S3
assembly and roller guide shaft S3 (35).
6. Remove the one screw (RK4 x 8), ornamental washer and washer to take out the roller guide T1
assembly.
7. Remove the hexagon cap screw (4 x 10), washer (W4) and spring washer (SW4) from inside
of the unit to take out the roller guide shaft T1 (35).
Roller guide S3
Roller guide
assembly
shaft S3 (35)
RK4 x 8
B2.6 x 6 d
Washer
Ornamental
washer
B3 x 4 c
B3 x 4 c
Front panel assembly
1-4 (E)
Escutcheon
Escutcheon
B2.6 x 6 d
Roller guide T1 assembly
Washer
RK4 x 8
Ornamental washer
Roller guide S2
Hexagon cap screw
W4 4 x 10
SW4
B2.6 x 6 b
B3 x 4 a
Left side panel
Roller guide shaft T1 (35)
DFP-R3000