Page 1
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema projection and film handling, with no warranties nor obligations from the authors, for qualified field service engineers.
Page 2
English Using this unit at a voltage other than 120V may WARNING require the use of a different line cord or attachment plug, or both. To reduce the risk of fire or electric To prevent fire or shock hazard, do not shock, refer servicing to qualified service personnel.
Page 3
WARNING: THIS WARNING IS APPLICABLE FOR USA ONLY. If used in USA, use the UL LISTED power cord specified below. DO NOT USE ANY OTHER POWER CORD. Plug Cap Parallel blade with ground pin (NEMA 5-15P Configuration) Cord Type SJT, three 16 or 18 AWG wires Length Less than 2.5 m (8 ft 3 in) Rating...
Table of Contents Overview ..................... 4 Overview of SDDS Player System ..........4 Principal Features ............... 4 System Configuration ................5 Location and Function of Parts ..............6 DFP-D2500 Front Panel............. 6 DFP-D2500 Connector Panel............. 8 DFP-D2500 Connector Pin Assignment ........9 Operation ....................
Overview Overview of SDDS Player Principal Features System This system is comprised of the DFP-R3000 Digital Film Sound Reader and the DFP-D2500 Film Sound The SDDS (Sony Dynamic Digital Sound) Player Decoder. System is a system that reads digital audio data recorded on 35 mm movie film in the SDDS format, The principal features of this system are as follows.
DFP-D2500 AC IN PROJECTOR I/O SYSTEM OUTPUT REMOTE READER 1 READER 2 LEVEL CONTROL AUX INPUT AUTOMATION RS-232C RS-422 Cinema sound equipment Note For details about installation and connection of this system, contact your Sony service or sales representative. 5(E)
DATA PRESENT MASTER LEVEL SDDS STATUS OVER OVER POWER SYSTEM OK EXT FADER REMOTE BYPASS MUTE SDDS Sony Dynamic MASTER Digital Sound VOLUME qfREMOTE indicator qdBYPASS button qsMUTE button qaSDDS button 0AUX button 9MASTER VOLUME dial 8MASTER LEVEL display 1 Power switch...
Page 8
When a red indicator goes on Lights when the system is being controlled remotely. frequently, it indicates that the film quality may have For details, contact your sony service or sales representative. degraded or the machines may be in need for maintenance.
3 READER 1/2 connectors 7 AUTOMATION connector Connect to the DFP-R3000 for input of digital audio This is a connector for automatic system control. signals read from the film. Use the READER 1 For details, contact your Sony service or sales connector in a system with one projector, and use representative.
2 REMOTE LEVEL CONTROL connector DFP-D2500 Connector Pin Assignment 1 SYSTEM OUTPUT connector 100kΩB Pin No. Signal – 8 AUX INPUT connector MAN FADE – – EXT FADER EN AUTO FADE Pin No. Signal REMTLY LEFT GND – LEFT HOT 3 READER 1/2 connector LEFT CENTER COLD CENTER GND...
Page 11
Location and Function of Parts 5 RS-422 connector Pin No. Signal – RTS(+) RTS(–) TXD(+) TXD(–) CTS(+) CTS(–) RXD(+) RXD(–) 6 RS-232C connector Pin No. Signal – – – – 10(E)
• The splice length should also be not more than a frame. Pad roller To the projector Film loading path in the DFP-R3000 Release the pad roller. Pull out a suitable length of film from the supply reel, and feed it along the path indicated by the black line on the front panel.
(1) Einschaltstrom, Stromsonde: General 80 A (240 V), 30 A (100 V) (2) Gemessen in EN55103-1: 70 A (230 V) DFP-R3000 Digital Film Sound Reader Operating temperature 5 °C to 40 °C (41 °F to 104 °F) Power requirements Operating humidity...
Page 16
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...