Lanner NCA-5220 User Manual page 43

NCA-5220 User Manual
2. Hold the chassis with its front
facing you, lift and gently insert it
by aligning with the slide-rail
assemblies as shown in the image,
and then push the unit into the
cabinet.
3. Keep sliding the rails in until they
stop about halfway. Press down the
metal clips on both inner channels
and push them further into the
cabinet.
4. To have the chassis completely
inserted into the rack, pull and hold
the Rail Lock tab on both brackets
while pushing in the chassis.
To detach the chassis from the rack,
pull the Release Tabs on both sides
of the brackets towards you while
gently sliding the chassis out.
Press down the metal
clips while pushing in.
Release Tab
43
Rail Lock