Lanner NCA-5220 User Manual page 42

NCA-5220 User Manual
1. This slide-rail kit does NOT require
screw-fixing. Aim at 3 available
screw holes on the rack front and
lock it by clipping the rail's front
end to the post, as shown in the
image below. You should hear a
"click" sound once it is firmly
attached.
2. For the rear rack installation, slide
the rail to aim and engage the bolts
on the rail's rear end with the 2
available holes on the post, and the
rail assembly will click into place.
3. Repeat Step 1~2 to install the other
rail onto the post.
1. Stretch both of the inner channels
out to their fullest extent. You will
hear a click sound when they are
fully stretched and locked.
Use this clamp
to fix the rail
front onto the
post.
Front Post
Rear Post
Click
The inner channel will
click when it is fully
stretched.
42
Click
Click
Click