Rear Panel - Lanner NCA-5220 User Manual

NCA-5220 User Manual
1. On Rear panel, loosen the screws that
secure the slot bracket so that you can
remove both PCIe slot covers, and then
lock the bracket back with the screws.
The PCIe slot covers are no longer
needed then.
2. The colored area indicated in the
picture is to be
accommodate the SSD swappable cage.
Press on the four connected points with
a flathead screwdriver to cut off the
unneeded parts. It is recommended not
to use your bare hands to tear apart the
metal pieces in case of injury.
3. Align the screws holes on the cage
bottom with the provided standoffs as
well as the holes on the chassis, and
secure the cage onto the chassis using
the provided screws.
removed to
Cage Front
Screw Holes
34
SATA Contact
Standoffs
Screws