Table of Contents
Advertisement
NCA-5220 User Manual
3. When you extract the processor from its package, carefully hold it by its edges and avoid touching its
golden contacts side. Make sure the golden triangular mark is aligned with the white one marked on
the motherboard and then insert it into the socket, as indicated in the picture.
4. After the processor is correctly seated in the socket, lower the lever along with the plate, slide the end
of the lever into the locking position.
5. Apply a thermal pad or proper amount of thermal
paste on the CPU surface. For thermal paste
application, avoid excessive amounts of grease in
case it spills onto the motherboard and cause
electrical damage to other components.
6. Install the heatsink onto the motherboard by
fastening its four screws onto the corresponding
mounting holes on the motherboard fasteners. To
apply equal pressure, please tighten the screws
diagonally no matter you start from which corner.
7. At last, install the fan duct and secure it with the
original screws.
Thermal Paste Application
25
1-2 mm
15-20mm
Advertisement
Table of Contents
