Maintenance - Phoenix Mecano DEWERT OKIN DUOMAT 7 HOME Installation Instructions Manual

DUOMAT 7
9.

Maintenance

 You should only use spare parts which have been manufactured or approved by DewertOkin.
Only these parts will guarantee a sufficient level of safety.
9.1 Maintenance
Type of check
Check the function and safe-
ty of the electrical system.
Look over the housing peri-
odically for any signs of
damage.
Look over the plug-in con-
nections and electrical ac-
cess points for signs of dam-
age.
Look over the cables for any
signs of damage.
Periodic functional test of the
end switches.
Check periodically to see if
the rechargeable battery is
ready and operational.
A periodic check that the
mechanical reset function is
functioning properly.
43170 6.0
Explanation
A qualified electrician should carry
out this inspection. (Refer to the
"Electrical connection" section in the
"Installation" chapter.)
Check the housing for breaks or
cracks. The IP protection will be
impaired by any breakage or cracks.
Check that all electrical cables and
connections are firmly seated and
correctly positioned.
Check the connecting cables for
pinching or shearing. Also check the
strain relief and kink protections
mechanisms, in particular after any
mechanical load.
Move the drive to the end positions
in order to test the end switches.
If you can no longer move the drive
in both directions with a fully
charged battery, then you should
replace the battery.
Operate the reset lever in order to
test the mechanical reset function.
(Refer to the "Mechanical reset
function option" section in the "No-
tices for Operation" Chapter.)
If the mechanical reset function is
not triggered then the drive is bro-
ken.
Maintenance
Time interval
Periodic inspections can
be carried out at intervals
based on the risk as-
sessment which you
conduct for your end
product.
At least every six
months.
At least every six
months.
At least every six
months.
At least every six
months.
At least every four
weeks.
At least every six
months.
33