Technical Specifications - Phoenix Mecano DEWERT OKIN DUOMAT 7 HOME Installation Instructions Manual

DUOMAT 7
5.

Technical Specifications

Connection to mains
Current consumption under rated
load
Permitted push force
Mode of operation
load
Protection classification
Noise level
Fuse
Current consumption of all drives
Drive type
Drive options
Protection category
Stroke distance
Colors
Length x width
Axle gap distance
Weight
Ambient conditions for operation,
storage and transport
Ambient room temperature for
storage and transport
Ambient room temperature for
operation
Relative humidity
Air pressure
Altitude
1)
Mode of operation: intermittent duty 2 min./18 min. This means that after the unit is operated with its rated
load for up to two minutes it must then be paused for 18 minutes. The unit can malfunction if this pause is
not observed!
2)
No more than two drives may be operated at rated load simultaneously!
3)
Other stroke distances are available on request.
43170 6.0
under max. rated
1
2
3
100 / 110 / 115 / 120 / 230 / 240 V AC,
50/60 Hz (refer to the ratings plate on drive)
0.63 A AC - 3.15 A AC, depending on mains connection
and load (refer to the ratings plate on drive)
max. 7000 N (total on both sides)
Intermittent duty 2 min./18 min.
II or III (refer to the drive's ratings plate)
≤ 65 dB(A)
T 0.63 - T 3.15 A, depending on mains power connec-
tion (refer to the drive's ratings plate)
max. 7.5 A DC (refer to the drive's ratings plate)
Double drive
DUOMAT 7, DUOMAT 7+1, DUOMAT 7+2
IPX4
87, 69 (standard)
Refer to sales brochure
750 mm x 175 mm
750 mm x 190 mm (with mechanical reset option)
581 ± 2 mm
approx. 6.3 kg (without optional battery)
from -20 °C to +50 °C
from -4 °F to +122 °F
from +10 °C to +40 °C
from +50 °F to +104 °F
from 30% to 75%
from 800 hPa to 1060 hPa
< 2000 m
Technical Specifications
17