Having The Outlet Hose Connected - Hanseatic WQP12-7635R User Manual

Substructure
90°
82 cm
58 cm
Inlet/outlet area and
electrical connec-
tion.
60 cm
Recess dimensions
• If you want to assemble your dishwasher
under a worktop, please make sure that
the worktop is continuous and that it is
screwed to the cupboards next to the
dishwasher.
• If you would like to install the dishwash-
er in a corner unit, ensure that there is
enough space in the corner to easily open
the door.
1. Turn the two screws on the back of the
cover plate.
2. Pull the cover plate backwards and re-
move it.
3. Screw both screws on the back of the
dishwasher in again.
Installation, connection and initial commissioning
90°
80 mm
4. Affix the enclosed condensation-protec-
100 mm
5. Position the dishwasher in the niche as
Having the outlet hose
connected
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
■
■
■
■
(c)
tive film (c) to the underside of the work
surface. In this way, you will avoid dam-
age to the work surface as a result of hot
steam which may be emitted from the
dishwasher if the dishwasher door is left
open.
described earlier.
NOTICE
Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
Ensure that there are no kinks or dam-
age to the outlet hose.
Make sure that the end of the hose is
not submerged in the pumped water.
Do not extend the outlet hose or re-
place with another drainage pipe.
Page EN-25