The Dishwashing Results Are Not Satisfactory - Hanseatic WQP12-7635 User Manual

The dishwashing results are not satisfactory

Problem Possible cause
There are resi- The rinse aid is incorrectly dosed.
dues or streaks
on the dishes.
There is no dishwasher salt.
The dishwasher salt is clumpy.
The dishes are There are food scraps which are en-
not completely crusted onto the dishes.
clean.
The dishes have not been stacked
optimally.
You have selected the incorrect
dishwashing programme.
The dishwasher detergent is incor-
rectly dosed.
The water pressure is too low.
The spraying arm can not rotate un-
hindered.
The nozzles on the spraying arm are
blocked/calcified.
Troubleshooting table
Solution
Adjust the dispensed dose (see
„Adding rinse aid" on page EN-11).
Add dishwasher salt (see „Adding
dishwasher salt" on page EN-12).
Stir the dishwasher salt using the
end of a spoon or similar.
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er" on page EN-13).
Select the correct dishwashing
programme (see „Dishwasher pro-
gramme table" on page EN-16).
Use the correct dosage of dishwash-
er detergent (see „Dishwasher pro-
gramme table" on page EN-16).
Turn the water tap on completely.
Ensure that no dishes are impeding
the motion of the spraying arm.
Clean the nozzles (see „Cleaning
the spraying arm" on page EN-21).
Page EN-29