Starting The Dishwashing Programme; Unloading The Dishwasher - Hanseatic WQP12-J7609D User Manual

Page EN-18 Dishwasher operation
Extra drying
Press the button (5) as often as required
until the display (12) is illuminated.
This option is not available with the pro-
grammes and .
Intensive dishwashing
Press the button (5) as often as required
until the display (11) is illuminated.
This option is not available with the pro-
grammes and .
Starting the dishwashing
programme
(1)
(8)
(9)
4. Start the programme with the button
(6).
The programme will begin after a few sec-
onds. The time display (9) shows the time
remaining; the dots between hour and
minute numbers will blink.
5. After the programme has ended, an
acoustic signal will sound 8 times.
Switch the dishwasher off using the but-
ton (1). Turn the tap off.
6. Wait a little while before unloading the
dishwasher.

Unloading the dishwasher

CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
Keep a suffi cient distance to the door
■
and do not hold your body or upper
body directly above the opened door.
Make sure that children do not open
■
the door if the programme has only
fi nished a short time ago.
Open the door slightly so that the
■
dishes can cool down.
Allow the dishes to cool before un-
■
loading the dishwasher.
(6)
CAUTION!
Trip hazard!
The dishwasher door standing open
can pose a tripping hazard.
Do not leave the dishwasher door
■
completely open.
Make sure that children and pets do
■
not stand on the open door.
Once the programme has ended and the
dishes have cooled off, you can remove the
dishes.
1. First empty the lower dish rack and cut-
lery basket and then work your way up.
This will prevent water dripping onto the
lower layer of dishes from the top racks
when emptying the dishwasher.
2. Leave the dishwasher door open slightly
so that the inside of the dishwasher can
cool off and dry.