Adding Dishwasher Salt - Hanseatic WQP12-J7609D User Manual

Page EN-12 Dishwasher detergents, rinse aids and dishwasher salts

Adding dishwasher salt

NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface by using dish-
washer salt in an improper manner.
Only use regenerating salt which is
■
specifi cally intended for dishwashers.
Always wipe away split dishwasher
■
salt immediately with a damp cloth.
Immediately after adding the dish-
■
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher
salt to the dishwasher salt compart-
ment if
– you are exclusively using multitabs which
already contain dishwasher salt,
– the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– the control display "add dishwasher salt"
(13) lights up.
(23)
1. Remove the lower dish rack (18).
2. Turn the cover of the dishwasher salt
compartment (23) in an anti-clockwise di-
rection and remove it.
3. Upon first use: Add 1.5 l water to the dish-
washer salt compartment so that the dish-
washer salt doesn't clump.
(b)
4. Place the supplied filling funnel (b) on the
compartment opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt
compartment (23) in a clockwise direction
up to the stop point.
8. Replace the lower dish rack (18).
9. Launch a dishwashing programme
straight away or carry out a test run im-
mediately upon first use using (see „Test
run" on page EN-26).