3.2.8 Version Info
Use this feature to verify the versions of the Firmware and Radio module of the Wireless Remote.
To see the Version Info:
1. Press the
Enter and the Speaker Volume screen appears (Figure 3-44).
Enter
Enter
Enter
2. Press the
3. Press the
Wireless Remote for Agilent Helium Leak Detector
,
, +, or - hard buttons to highlight the Home screen Tools icon
Figure 3-44. Speaker Volume Setup Screen
and the Backlight screen appears (Figure 3-45).
Figure 3-45. Backlight Screen
and the Setup screen appears (Figure 3-46).
Figure 3-46. Setup Screen
and press
3-27