Table of Contents
Advertisement
Radio Compliance
The RF transceiver module in the unit has been tested and found to comply with the limits for:
A mobile Spread Spectrum Transmitter operating under USA: FCC Part 15C, Section
•
15.247 and Canada: CAN/IC, RSS-210, Issue 8, December 2010 and
Class 2 transceiver operating under Europe: R&TTE Directive 1999/5/EC and ETSI EMC
•
Standards: EN 300 328-1 V1.7.1 (2006-10), EN 301 489-1 V1.9.2 (2011-09)), EN 301 489-3
V1.5.1(2012-07) and EN 301 489-17 V2.2.1 (2012-09) that meets regulations for the 2.4
GHz ISM band.
Taiwan NCC LP0002
•
These limits are designed to provide reasonable protection against harmful interference when it is
operated in a commercial environment.
This equipment generates, uses, and can radiate RF energy, which if not installed and used in
accordance with the instructional manual, can cause harmful interference to radio
communications.
When this equipment is operated in a commercial environment, operation is subject to the
following two conditions:
This equipment must not cause harmful interference.
•
This equipment must accept any interference received, including interference (RF and ESD)
•
that may cause undesired operation.
Any modifications on the unit made by the user are liable to cause non-compliance with
•
regulations or affect the EMC performance and the safety of the product. Agilent cannot be
held responsible for consequences resulting from such intervention.
The unit can be damaged by:
•
o
o
o
To avoid electric shock, connect the product power cord of the external AC/DC power supply to a
grounded power receptacle. A power cord with a grounding conductor is required.
Wireless Remote for Agilent Helium Leak Detector
Radio Frequency (RF) and Electrostatic Discharge (ESD) energy inputs that exceed
the maximum ratings
Immersion in liquids
Physical abuse
xvii
Advertisement
Table of Contents
