3.2 Screens
Use the LCD display for the initial set-up and configuration of the wireless remote. Once
the wireless link is set up and configured for a specific application, leak detector basic
operation is controlled primarily using the leak detector TEST
the leak detector ZERO
TEST/HOLD
TEST
HOLD, READ STANDARD LEAK
READ STANDARD LEAK, and Zero
TEST
TEST
HOLD
HOLD
READ STANDARD LEAK
READ STANDARD LEAK
The wireless remote updates the LCD display for leak rate and status approximately once
per second.
3.2.1 Basic Functions
Table 3-1 explains the basic on-screen functions used to enter or manipulate values.
Wireless Remote for Agilent Helium Leak Detector
ZERO and STDLK
ZERO
ZERO
STDLK soft buttons and/or the wireless remote keypad
STDLK
STDLK
Table 3-1. Screen Basic Functional Items
Item
Item
Item
Item
TEST and VENT
TEST
TEST
Zero buttons.
Zero
Zero
Function
Function
Function
Function
Appears on screens more than one level from
the Home screen. Highlight this button and
press the Enter button to return directly to the
Home screen.
Saves all values on the screen and exits to the
next higher screen.
Scrolls through menu selection screens when
there is more than one screen choice.
VENT hard buttons and
VENT
VENT
3-5