Table of Contents
Advertisement
Warning
Power
The wireless remote is the digital device, which compromise a microprocessor based digital
electronics, LCD display and 2.4 GHz, radio module. During RF transmission and software program
execution the unit consumes high current pulses from a power source: an external AC/DC power
supply or a battery set (4-AA cells, primary or rechargeable types).
External AC/DC Power
External Supply
Use only UL/CSA and/or International Safety Agency approved external AC/DC power supply, wall-
mount plug-in or desktop type, which meet the follow specifications:
Output
Voltage: (4.0 to 6.0) VDC
•
Current: 1.0 A min.
•
Plug:
•
o
o
Battery Set Power
Battery Supply
The unit uses 4, alkaline, NiMH or other AA size battery set, primary or rechargeable cells batteries,
that supply voltage from 4.0 VDC to 6.0 VDC and suitable for the high current pulse application.
The battery set is automatically disconnected when the external AC/DC power supply is connected
to the unit.
Rechargeable batteries will not be charged while the DC power supply is plugged into the charger.
Rechargeable batteries must be charged externally on a separate battery charger.
Wireless Remote for Agilent Helium Leak Detector
The Wireless Remote Contains FCC ID: KQL-RM024, IC: 2268C-
RM024 RF transceiver module. The enclosed device complies
with Part 15 of the FCC Rules and Industry Canada License
Exempt RSS Standard(s).
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device
must accept any interference received, including interference
that may cause undesired operation.
To satisfy FCC RF exposure requirements for mobile type
transmitting devices, a separation distance of 20 cm or more
should be maintained between the antenna of the Wireless
Remote and persons during operation, with exception of hands
wrist, feet, and ankles. To ensure compliance, operations at
closer distance than this distance are prohibited.
An operator should keep the separation distance of 20 cm or
more from the RF antenna of the leak detector with a Wireless
Base Station.
Barrel type: 2.5 mm ID x 5.5 mm OD, Female
Barrel's polarization: Internal (+), External (-)
xiii
Advertisement
Table of Contents
