Home Screen; Figure 3-1. Home Screen - Linear And Log Views - Agilent Technologies VS G8600-60002 Operation Manual

3.2.2 Home Screen

This screen appears on power up if the wireless remote establishes a wireless link to a leak
detector.
On the Home screen, a highlighted pointer appears on of the selected function: Linear or Log Rate,
Tools and Speaker icons.
To select a function:
1. Press the
item.
2. Press the ENTER ENTER button to select that function.
ENTER ENTER
To set the volume on/off:
1. Press the
2. Press the ENTER
3. Press the ENTER
the level it was at prior to being turned off.
The Home screen displays a summary of the following status, configuration settings, and icons
(Figure 3-1):
1. Digital leak rate
2. Leak rate bar graph
3. Linear (3a) or Log scale (3b)
4. Exponent range
5. Battery power level icon
6. Tools icon
7. Speaker icon
8. RF signal strength icon
9. Leak detector status message
1, 2, 3a, 3b and 4 1, 2, 3a, 3b and 4 - 1, 2, 3a, 3b and 4 1, 2, 3a, 3b and 4
Leak Rate Display Leak Rate Display
Leak Rate Display Leak Rate Display
Wireless Remote for Agilent Helium Leak Detector
, , +, or - hard buttons to move the pointer around the screen and highlight an
, , +, or - hard buttons to select the speaker icon
ENTER button once to set the speaker off.
ENTER ENTER
ENTER button again to return the speaker to on. the volume level is restored to
ENTER ENTER

Figure 3-1. Home Screen - Linear and Log Views

The wireless remote displays leak rate in either LOG or Linear modes. The
wireless remote automatically displays the same leak rate that the leak
detector is displaying. Since the wireless remote knows the leak rate units
setting for the leak detector, it displays the appropriate ranges for LOG
mode.
on the Home screen.
3-7