Wireless Remote for Agilent Helium Leak Detector
Table 3-2 explains the status messages that appear on the wireless remote Home Screen.
Icon
Icon
Icon
Icon
TEST, HOLD, VENT,
ROUGHING or
CALIBRATING
STANDARD LEAK
NO CONNECTION
Table 3-2. Status Messages
Indicates the leak detector is in this mode
Indicates the leak detector is reading the internal calibrated leak.
Indicates the connection has failed. This may be momentary or it
may indicate that the:
wireless remote's signal is obstructed.
•
wireless remote's is out of range.
•
leak detector is not configured for wireless communication.
•
leak detector is off.
•
Meaning
Meaning
Meaning
Meaning
3-6