Radio - Agilent Technologies VS G8600-60002 Operation Manual

Wireless Remote for Agilent Helium Leak Detector
LCD Display
Caution
Caution
Warning

Radio

The wireless remote is built around an RF transceiver module operating in 2.4 GHz ISM band. The
same type of the RF module used in this unit is built into the Wireless Remote Base Unit for Agilent
Helium Leak Detector (G8610-63000 for field install or make to order), or legacy VS Series G8600-
68000 (factory installed) and G6800-68001 (field installed).
The wireless remote operates in a point-to-point or point-to-multipoint, client-server or peer-to-peer
architecture. One RF transceiver is configured as a server and there can be one or many clients. To
establish synchronization between transceivers, the server emits a beacon. Upon detecting a
beacon, a client transceiver informs its host and a RF link is established.
Do not apply excessive pressure to the LCD display as this may
cause smears.
In general, the lower the temperature, the longer it takes the LCD
display to turn on. Performance of the LCD display may
deteriorate in low temperature.
If the LCD display breaks, avoid getting any liquid crystal in
mouth or eyes. If it gets on the operator hands, feet or clothing,
wash it immediately with soap and water.
xii