Heater/Installation Kit; Foreword; General Instructions; Special Tools - Webasto Thermo Top Evo Installation Manual

Heater/Installation Kit

Quantity Designation
1 Basic delivery scope Thermo Top Evo
1 Installation kit for Kia Picanto 2011 Petrol
1 Heater control

Foreword

This installation documentation applies to Kia Picanto Petrol vehicles - for validity, see page 2 - from
model year 2011 and later, assuming technical modifications to the vehicle do not affect installation,
any liability claims excluded. Depending on the vehicle version and equipment, modifications may be
necessary during installation with respect to this installation documentation.
However, the stipulations in the "installation documentation", the "operating instructions" and "installa-
tion instructions" for the Thermo Top Evo must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless spec-
ified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring harnesses
using cable ties. Insulate loose wires and tie back.
Sharp edges should be fitted with rub protection (split-open fuel hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No. 111329).
While installing an IPCU, the corresponding settings must be controlled or adjusted before the instal-
lation.

Special Tools

- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Metric thread-setter kit
1317554A_EN
Kia Picanto
Order No.:
See Price list
1317553A
See Price list
3