Heater / Installation Kit; Foreword; General Instructions; Special Tools - Webasto Thermo Top E Installation Documentation

Heater / Installation Kit

Quantity Description
1 Retail accessories with desired heater control
1 Installation kit for Skoda Superb Diesel - Common Rail with
direct shifting transmission (DSG)
To be ordered extra:
Quantity Description
1 Additional bracket
2 Bolt
1 Quick-release coupling
Also required for Climatronic:
Quantity Description
1 IPCU Kit for Climatronic
Heater recommended for the respective vehicle class:
Vehicle
Compact car
Mid-size car, estate car
Full-size car, van, Offroader
The selection of the heater is based on the passenger compartment size of the vehicle and the level of
comfort required by the customer!

Foreword

This installation documentation applies to Skoda Superb Diesel - Common Rail with direct shifting
transmission (DSG) vehicles - for validity, see page 2 - from model year 2008 and later, assuming tech-
nical modifications to the vehicle do not affect installation, any liability claims excluded. Depending on
the vehicle version and equipment, modifications may be necessary during installation with respect to
this installation documentation.
However, the stipulations in this "installation documentation", the "operating instructions" and the "in-
stallation instructions" for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless spec-
ified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring harnesses
using cable ties. Insulate loose wires and tie back.
Sharp edges should be fitted with rub protection (split-open plastic hose).
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No. 111329).
Check or adjust the corresponding settings before installing an IPCU!

Special Tools

- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Hole saw 42mm dia.
1314084D_EN
Skoda Superb
Order No.:
See price list
1314083B
Order No.:
Skoda No.: 1Z0 810 679
Skoda No.: N90 749 003
VAG No.: 3B0 122 291 B
Order No.:
9013645A
Heater
Thermo Top E
Thermo Top C
Thermo Top P
3