Heater Unit/Installation Kit; Foreword; General Instructions; Special Tools - Webasto thermo top e Installation Instructions Manual

Heater Unit/Installation Kit

Quantity Description
1 Retail accessories Thermo Top E / C / P
1 Installation kit Peugeot 3008 Gasoline ACC
1 Heater control
Heater unit recommended for the respective vehicle class:
Vehicle
Compact car
Mid-size car, station wagon
Full-size car, van, offroader
The selection of the heater unit is based on the passenger compartment size of the vehicle and the
level of comfort required by the customer!

Foreword

These installation instructions apply to Peugeot 3008 Gasoline vehicles - for validity, see page 2 - from
model year 2009 and later, assuming technical modifications to the vehicle do not affect installation,
any liability claims excluded. Depending on the vehicle version and equipment, modifications may be
necessary during installation with respect to these installation instructions.
However, the stipulations in this "installation instructions" and the "operating and maintenance instruc-
tions" for the Thermo Top C/P/E must always be observed.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.

General Instructions

Installation should be carried out according to the general, standard rules of technology. Unless spec-
ified otherwise, fasten hoses, lines and wiring harnesses to original vehicle lines and wiring harnesses
using cable ties.
Sharp edges must be provided with rub protection (cut-open fuel hose)!
Spray unfinished body areas, e.g. drilled holes, with anti-corrosion wax (Tectyl 100K, Order No.
111329).

Special Tools

- Torque wrench for 2.0 - 10 Nm
- Hose clamping pliers
- Metric thread-setter kit
1314514A_EN
Peugeot 3008
Order No.:
See price list
1314513A
See price list
Heater Unit
Thermo Top E
Thermo Top C
Thermo Top P
3