Mic Settings; One Touch Hold; Performance Hold; Pedal Switch And Pedal Control - Roland BK-9 Owner's Manual

Menu options

Mic Settings

This page can be selected using [MENU] button  "Global"  "MIC
Settings".
The BK-9 provides an equalizer you can set for the MIC IN input.
Parameter Setting
50 Hz, 80 Hz, 100
Hz, 150 Hz, 200
Eq Low Freq
Hz, 250 Hz, 300 Hz,
400 Hz
Eq Low Gain -15 db~0~+15 db
2000 Hz, 3000 Hz,
4000 Hz, 5000 Hz,
6000 Hz, 7000 Hz,
Eq High Freq
8000 Hz, 9000 Hz,
10000 Hz, 11000
Hz, 12000 Hz,
Eq High Gain -15 db~0~+15 db

One Touch Hold

This parameter can be selected using [MENU] button  "Global" 
"One Touch Hold".
The parameters on this page allow you to filter certain "One Touch"
settings. Select "On" for the settings you do not want to load along
with the remaining One Touch settings when you press a ONE
TOUCH button.
Parameter Setting
Tempo Off, On
Tone Part* Off, On
Intro/Ending Off, On
Variation Off, On
Expression Pedal Off, On
Assign Switches Off, On
DBeam Off, On
Bass Inversion Off, On
144
Right Display
Explanation
Frequency of the low range you wish to
boost or cut.
Gain of the low range. Negative values
reduce the level
Frequency of the high range you wish
to boost or cut.
Gain of the high range. Negative values
reduce the level.
Right Display
Parameter Setting
Scale Tune Off, On
[*] This parameter filters also the "Lower Hold" parameter (p. 136).

Performance Hold

This page can be selected using [MENU] button  "Global" 
"Performance Hold".
The parameters on this page allow you to filter certain Performance
settings. Select "On" for the settings you do not want to load
along with the remaining settings when you select a Performance
memory.
Parameter Setting
Rhythm* Off, On
Tempo* Off, On
Expression Pedal Off, On
Assign Switches Off, On
DBeam Off, On
Tone* 1
Off, On
Tone Part* 2
Off, On
Split Off, On
Lower Octave Off, On
Arr. Type Off, On
Key* Off, On
MIDI Set Off, On
Bass Inversion Off, On
Scale Tune Off, On
[* 1 ] These parameters can also be switched by pressing and holding
the assigned buttons on the front panel.
[* 2 ] This parameter filters also the "Lower Hold" parameter (p. 136).

Pedal Switch and Pedal Control

You can connect two types of Pedal Switch to the BK-9's PEDAL
CONTROL jack (Not Continuous or Continuos).
The "Not Continuous" pedal (e. g. DP-2) has only two states: Off and
On.
The "Continuous" pedal (e. g. DP-10) has more states between On/
off.
The BK-9 recognizes the type of pedal switch you connect to the
PEDAL CONTROL jack:
Pedal Switch Jack Type
Right Display
How BK-9 recognize the pedal switch
Mono Type: Not Continuous
Stereo Type: Continuous