Mounting The Switch A Rack; Installing The Switch On A Table Or Shelf - Cisco C9200L-48P-4G Installation Manual

Mounting the Switch a Rack

Mounting the Switch a Rack
Procedure
Step 1 Use the four supplied Phillips machine screws to attach the brackets to the rack.
Step 2
Use the black Phillips machine screw to attach the cable guide to the left or right bracket.

Installing the Switch on a Table or Shelf

Procedure
Step 1 To install the switch on a table or shelf, locate the adhesive strip with the rubber feet in the mounting-kit
envelope.
Step 2 Attach the four rubber feet to the four circular etches on the bottom of the chassis.
Figure 18: Attaching the mounting feet for Table-Mounting or Shelf-Mounting
1
Step 3
Place the switch on the table or shelf near an AC power source.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
24
Rubber mounting feet
Installing the Switch