Preparing The Measurement Arm; Positioning The Cuff And Device - Microlife BP 3SZ1-1 Instruction Manual

Preparing the measurement arm – Remove all
clothing covering or constricting the measurement arm.

Avoid rolling up long sleeves, as this may lead to constriction of blood
flow to the measurement arm.
Positioning the cuff and device – Fit the cuff closely,
but not too tight. Make sure that the cuff is 2~3 cm (1
inch) above the elbow with the tube on the inside of the
arm. The cuff tube should point upwards and should be
mounted over the patient's shoulder to the other site of the
body.

Add the pouch to the belt to carry the device.

Adjust the tube holder on the belt of the pouch so it is properly positioned
on the shoulder.
WatchBP O3
2–3cm
13
EN