Measurement Programming; Connecting The Device To A Computer; Start The Software Program - Microlife BP 3SZ1-1 Instruction Manual

Measurement programming

Connecting the Device to a Computer

Connect the device to the PC using the USB cable
provided with the device.

Start the Software Program

Start the software program. The date/time on the device
will sync with date/time of PC automatically when
successfully connected with WatchBP Analyzer PC
software.
If the device and WacthBP Analyzer software is connected
successfully:
• <USb> is displayed on the LCD screen of the device.
• The device ID, model, version of the Device and
batteries condition etc. are displayed on the WatchBP
Analyzer software.

See also the Instruction manual of the WatchBP Analyzer for details. The
instruction manual of the WatchBP Analyzer can be found in the software
by clicking <About> in the functional bar.
WatchBP O3
9
EN