Before Using The Device For The First Time; Activating The Device - Microlife BP 3SZ1-1 Instruction Manual

Before using the device for the first time

Activating the device

Open the battery compartment on the rear of the device
and insert 4x AAA alkaline batteries according to the
battery polarities (+ / - ) and close the compartment.
Press the On/Off button
The device displays sequentially the full screen display,
the voltage of the batteries, the number of measurements
stored on the device and the countdown minutes before
the next measurement based on default schedule
programmed on the device.

Program the device and clear existing measurements of the device before any
new patient session.

The default measurement interval is 30 minutes for the awake hours and 60
minutes for the asleep hours.
8
to activate the device.
Installing the Software Program
Download the latest WatchBP Analyzer Software from the
Microlife website.
https://www.microlife.com/support/software-
professional-products
Double click the download installer and simply follow the
instructions provided in the installation window on the
computer screen.