Setting Switch; Rebooting Lockly; Tm Secure - Lockly Secure LUX User Manual

2.6 Setting Switch

Switch 1: Auto Lock (Default: ON)
With Auto Lock enabled, the smart lock will automatically
relock the door 5s to 30s after unlocking.
Switch 2: Alarm Mode (Default: OFF)
With Alarm Mode on, the door reacts against external
activity according to the sensitivity level that has been set.
Switch 3: Audio (Default: ON)
Enables the Audio sound (Beeper) when in the ON position.
Switch 4: Random (Default: OFF)
With Random mode on, every time you enter a digit
while entering passcode, the display keypad will be
refreshed.

2.7 Rebooting Lockly

NOTICE
Press and release the reboot button when you want to reboot the lock. Your
Lockly™ will beep once after reboot. Only reboot when necessary.
To reboot, find the reboot button located below the keyhole from the exteri-
or of Lockly™ Secure Lux.
You will need something small such as a paperclip, to press the reboot
button. Insert the paper clip and press down firmly.
SECTION 2.6
Secure
TM
Reboot Lockly™ in case of dead battery or
malfunction. No settings will be changed and all
Access Codes will still be stored within Lockly™.
Setting Switch
Reboot Button
7