Installation Of The Bullet Camera - ERNITEC MicroView MVCLOUD-201 Quick Start Manual

Network Ernitec Cloud Bullet Camera·Quick Start Guide

Installation of the Bullet Camera

2.1
Both wall mounting and ceiling mounting are suitable for the bullet
camera. Wall mounting will be taken as an example in this section.
You can take steps of wall mounting as a reference if ceiling mounting
is adopted.
Steps:
1. Drill the screw holes in the wall according to the drill template.
Hole
Ceiling Mounting
Hole
Hole
Figure 2-1 Drill Template
2. Route the corresponding cables.
3. Secure the camera to the wall with the supplied Screws.
15