Poe Power Supply Configuration (Optional) - ERNITEC MicroView MVCLOUD-201 Quick Start Manual

Network Ernitec Cloud Bullet Camera·Quick Start Guide
You can also press the WPS button on the camera first and then
enable the WPS function on the router to establish the
connection. But the WPS function of the router must be turned
on within 120s right after pressing the WPS/RESET button on the
camera.
Screw the microSD/RESET/WPS Cover back to the camera after all the
settings.

1.2.3 PoE Power Supply Configuration (Optional)

This type of bullet camera supports PoE power supply. You can power
the camera by connecting both DC 12V interface and the Ethernet
interface. Or you can connect the Ethernet interface only.
WPS/RESET
Figure 1-4 WPS/RESET Button
13