ERNITEC MVCLOUD-201 Quick Installation Manual

Quick Installation Guide of MVCLOUD-201 Ernitec Network Camera
This guide is for quick installing and connecting the camera, for more details,
please refer to the User's Manual of the camera
Camera's Connectors
1
2
3
5
4
6
7
11
8
10
9
No. Description
Mounting
1
Base
2 Main Body
No. Description
3 Sun Shield
4 Lens
5 Adjusting Nut
WPS/RESET
6
Button
Press RESET about 10s when the camera is power on or rebooting to restore the
default settings, including the user name, password, IP address, port No., etc.
s
No. Description
microSD Card
7
Slot
Power Supply
8
Interface
No. Description
10/100M Self-
9 adaptive Ethernet
Interface
10 PoE Cable
11 GND Screw
Setting the Network Camera over the LAN
Please connect the camera to the Internet Box according to the following figure
How to Download "Ernitec Cloud" App on IOS/Android
To use the mobile application "Ernitec Cloud", you should
download it with two ways:
• Searching "Ernitec Cloud" from the Google Play
(Android) or from the App Store (IOS).
Ernitec App for Android
Register Camera with scan of the QR Code
You can register your camera with scanning the QR code from "Ernitec Cloud"
App on IOS/Android using your smartphone or your iPhone equipped with an
application to read QR codes. Once you scan the QR Code existing on the sticker
of camera box, the link of download application appears on the screen of your
smartphones or your iPhone.
QR Code
s
Ernitec App for IOS
s
s