Installation Of The Bullet Camera - ERNITEC MicroView MVIB-01IR-E Quick Start Manual

Network Bullet Camera·Quick Start Guide
3. (Optional)To unmount the memory card, push to get it ejected.
4. Screw the cover back to the camera.

Installation of the Bullet Camera

Both wall mounting and ceiling mounting are suitable for the bullet
camera. Wall mounting will be taken as an example in this section.
You can take steps of wall mounting as a reference if ceiling mounting
is adopted.
Steps:
1. Drill the screw holes in the wall according to the drill template.
Hole
Ceiling Mounting
Hole
Hole
Drill Template
19