Setting The Wps Protocol - ERNITEC MicroView MVCLOUD-201 Quick Start Manual

Network Ernitec Cloud Bullet Camera·Quick Start Guide
WPS function and Reset function share the same button. The
button works as a reset button only when you press it when the
camera is powered on.

1.2.2 Setting the WPS Protocol

A wireless router with the WPS function is required to enable the
WPS function of the camera. Refer the steps below.
Steps:
1. Enable the WPS function of your router. Refer to the operation
guide of your router for detailed procedures.
2. Press the WPS/RESET button (about 2s) on the camera to join in
the wireless network.
Figure 1-3 WPS/RESET Button
12