Siemens SITRANS F Series Function Manual page 56

Communication
2.10 Acyclic communication
Index Parameter Name
26 VIEW_1
Manufacturer Specific
36 PROCESS_VALUE_
UNITS_TEXT
Table 2-17 Slot 12: Analog Input block - Frame temperature
Index Parameter Name
16 BLOCK_OBJECT
17 CURRENT_MODE
22 PROCESS_VALUE
23 PROCESS_VAL‐
UE_UNITS
24 DAMPING
25 SIMULATE
26 VIEW_1
Manufacturer Specific
36 PROCESS_VAL‐
UE_UNITS_TEXT
56
Data Type Access Annotation
Read Read-only parameter to read
only
● CURRENT_MODE
● STANDARD VOLUME FLOW
● STANDARD VOLUME FLOW UNITS
● DAMPING
● SIMULATE
Visible‐ Read
only
String (8)
Data Type Access Annotation
DS-32 Read Constant block information
only
Unsigned8 Read Follows the target mode of the Physical Block
only
8: Automatic
128: Out of service
DS-101 Read Process value with quality code
only
Un‐ Read Read-only copy of the transducer block unit setting
signed16 only
Float32 Read / Low-pass filter of the input value. Value in seconds. Valid
write range: 0...100 s
DS-50 Read / Possibility to simulate the PROCESS_VAUE parameter (in‐
write cluding the quality code). This could be used to verify the
PLC program behavior.
Read Read-only parameter to read
only
● CURRENT_MODE
● FRAME TEMPERATURE
● FRAME TEMPERATURE UNITS
● DAMPING
● SIMULATE
Visible‐ Read
String(8) only
FCT030 Profibus (From firmware 4.0)
Function Manual, 06/2018, A5E39931906-AB