Siemens SITRANS F Series Function Manual page 45

In‐ Parameter Name
dex
24 DAMPING
25 SIMULATE
26 VIEW_1
Manufacturer Specific
36 PROCESS_VAL‐
UE_UNITS_TEXT
Table 2-8 Slot 3: Analog Input block - Medium temperature
Index Parameter Name
16 BLOCK_OBJECT
17 CURRENT_MODE
22 PROCESS_VALUE
23 PROCESS_VAL‐
UE_UNITS
24 DAMPING
25 SIMULATE
26 VIEW_1
Manufacturer Specific
36 PROCESS_VAL‐
UE_UNITS_TEXT
FCT030 Profibus (From firmware 4.0)
Function Manual, 06/2018, A5E39931906-AB
Data Access Annotation
Type
Float32 Read / Low-pass filter of the input value. Value in seconds. Valid range: 0...100
write s
DS-50 Read / Possibility to simulate the PROCESS_VAUE parameter (including the
write quality code). This could be used to verify the PLC program behavior.
Read only Read-only parameter to read
● CURRENT MODE
● DENSITY FLOW
● DENSITY UNITS
● DAMPING
● SIMULATE
Visible‐ Read only
String(8
)
Data Type Access
DS-32 Read
only
Unsigned8 Read
only
DS-101 Read
only
Un‐ Read
signed16 only
Float32 Read /
write
DS-50 Read /
write
Read
only
Visible‐ Read
String(8) only
Annotation
Constant block information
Follows the target mode of the Physical Block
8: Automatic
128: Out of service
Process value with quality code
Read-only copy of the transducer block unit setting
Low-pass filter of the input value. Value in seconds. Valid
range: 0...100 s
Possibility to simulate the PROCESS_VAUE parameter (in‐
cluding the quality code). This could be used to verify the
PLC program behavior.
Read-only parameter to read
● CURRENT_MODE
● MEDIUM TEMPERATURE
● MEDIUM TEMPERATURE UNITS
● DAMPING
● SIMULATE
Communication
2.10 Acyclic communication
45