HT EQUITEST 5071 User Manual page 33

If in a 230V system, the
instrument detects that
terminals B3 and B4
have been exchanged,
the following message
appears on the display.
Check the connection of
the separate cables.
If the instrument detects
that, in case test is
carried out, a Contact
Voltage higher than the
limit value set would be
found in the system
being tested, it does not
perform the test and the
following message
appears on the display.
Check for the efficiency
of the PE conductor and
of the grounding system.
If the instrument detects
an Earth resistance so
high that the
conductor of
grounding system itself
may be considered
missing, the following
message appears
the display. Check for
the efficiency of the PE
conductor and of the
grounding system.
If, after repeated tests,
the instrument
overheated,
following message
appears on the display.
Wait for the message to
disappear
carrying out other tests.
LOOP
- - -
FRQ=50.0HZ
VP-N=131V
CHANGE N-PE
P-N
FUNC Z2
LOOP
- - -
FRQ=50.0HZ
VP-N= 1V
Ut DANGEROUS
R
A
FUNC
LOOP
- - -
Earth
the
FRQ=50.0HZ
VP-N=231V
on
P-PE
FUNC Z2
LOOP
has
- - -
the
FRQ=50.0HZ
before
VP-N=231V
HIGH TEMP
P-PE
FUNC Z2
30.11.12

---A
VP-PE= 227V
30.11.12

---A
Vp-PE= 0V
50V
UL
30.11.12

---A
Vp-PE= 40V
NO PE
50V
UL
30.11.12

---A
Vp-PE= 40V
50V
UL
EN - 31
EQUITEST 5071
Phase and
conductors have
exchanged.
The instrument detects a
dangerous Contact Voltage
Inefficient grounding
system
The instrument
overheated
Earth
been
has