Anomalous Situations In "Auto", "Rt+", "Rt-" Mode - HT EQUITEST 5071 User Manual

6.1.2.1.

Anomalous situations in "AUTO", "RT+", "RT-" mode

 If the instrument detects
a voltage higher than
approx. 15V at the input
terminals, the message
to the side appears on
the display.
 If the instrument detects
that:
R > R
CALIBRATION
the message to the side
appears on the display.
 In case a resistance
higher or equal to 5
but lower than 99,9 is
detected, at the end of
the test the instrument
gives out a long sound
and the following screen
appears on the display.
The results can be saved by pressing the SAVE key twice (see § 7.1).
 In case a resistance
higher than 99,9 is
detected, at the end of
the test the instrument
gives out a long sound
and the following screen
appears on the display.
The results can be saved by pressing the SAVE key twice (see § 7.1).
LOW
R+
-.--
---mA
 VOLT IN INPUT
AUTO
FUNC
LOW
 0.00
MEASURED
R+
0.00
219mA
AUTO
FUNC
PREVIOUS RESULTS CANNOT BE SAVED.
LOW

R+
5.17
209mA
AUTO
FUNC
LOW
> 99.9
R+
-.--
---mA
AUTO
FUNC
30.11.12
-.- -
R-
-.--
---mA
0.11
CAL
30.11.12
R-
0.00
219mA
 CAL > RES
0.11
CAL
30.11.12
5.17
R-
5.17
209mA
0.11
CAL
05.06.12
R-
-.--
---mA
0.11
CAL
EN - 13
EQUITEST 5071
The test cannot
carried out because
voltage has
detected at
instrument's inputs
CAUTION:
R > R
CALIBRATION MEASURED
Resistance higher than 5
Test current
Resistance with a value
higher than 99.9
CAUTION: Resistance
value out of range
be
been
the