START OF OPERATIONS AND SETUP
5.3
Vacuum Connection (only FMCB)
A hose that is suitable for vacuum applications must be connected at the installed hose connection
and secured with the included hose clamps. The supply hose must have the same nominal diameter
as the installed connection. The maximum recommended hose length is around 10 meters.
For instructions on opening the housing, see chapter 8.7.
Vacuum
Once vacuum is applied in a gripper, it immediately begins suction.
30.30.01.01840/01
www.schmalz.com
1. Hose connection
2. Hose clamp
1
2
EN | 23