Sony HDCU-900 Series Installation And Maintenance Manual page 34

1-7. Installing in 19-inch Rack
Rack Mount Procedure
1. Pull out the inner rail while pressing the stopper of the
rail.
Outer rail
2. Attach the inner rails to the unit using the six screws
(B4 x 8).
Inner rail
B4 x 8
1-26 (E)
Stopper
Inner rail
Inner rail
B4 x 8
3. Attach the front and rear brackets to the outer rails
using the eight screws (B4 x 8).
m
. When attaching the front bracket, slide the mid-
member until the screw holes in the cabinet-member
are visible through the hole in the mid-member as
shown below.
. When attaching the rear bracket, adjust the position
of the bracket with the rack depth.
Plate nut
Rear bracket
B4 x 8
Cabinet-member
Mid-member
Mid-member
4. Attach the front and rear brackets to the outside of the
rack temporarily using the eight screws (B5 x 8).
Rack (front)
12.7
31.75
12.7
31.75
Front bracket
B5 x 8
Front bracket
B4 x 8
Front bracket
B4 x 8
Rack (rear)
Outer rails
31.75
Rear bracket
B5 x 8
Unit : mm
HDCU-900 IMM