Launching Nw8204 From Dms Host - Siemens NK8000 Series Installation, Configuration & Operation

9.3.1
Building Technologies
CPS Fire Safety

Launching NW8204 from DMS host

To access the NW8204 tool, do the following:
You need to install the NW8204 maintenance tool (via the DMS8000 DVD) on

the host DMS before proceeding, if it is not already installed.
For NW8204 installation instructions, see NW8204 diagnostic tool [➙ 51].
1. Select Start > Programs > NW8204 > NW8204 (executable file)
Note: Depending on your system security settings, you may need to launch
NW8204 with administrator rights ("Run as administrator").
 You are logged in as 'guest' (default user type) when the NW8204 window
appears.
– To change user type (for example, from 'guest' to 'admin'), select Change
User to display the Login window.
Note: You can log in to the NW8204 tool in the following ways:
- Guest user (default): user name = "guest" / password = "guest"
(recommended – read-only privileges).
- Administrative user: call customer support for username and password
(read/write privileges).
Case sensitive – enter letters in lower case only.
NW8204 window (installed GUI)
2. Enter the NK IP Address.
Note: If the IP address you enter is incorrect, the following message displays.
Maintenance and diagnostics
The NW8204 diagnostic tool
A6V10062437_a_en
9
63
30.01.2019