Siemens NK8000 Series Installation, Configuration & Operation page 7

Building Technologies
CPS Fire Safety
Menu paths are indicated in bold.
Error and system messages are displayed in
Courier New font.
Italics
are used to emphasize a term.
Caution
Warning
Cross references to other information in
printed material are indicated with an arrow
and the page number, enclosed in brackets:
[→92]
Modification index
Note: For versions more than four years old, please visit the Siemens Asset Portal.
Version Date
A6V10062437_a_en 01.2019
A6V10062437_b_en 09.2017
A6V10062437_a_en 09.2016
A6V10062437_a_en 09.2015
A6V10062437_a_en 09.2014
A6V10062437_a_en 06.2013
About this document
Select File > Text, Copy > Group, which
means from the File menu, then select Text,
Copy and finally Group.
The message Definition
successfully renamed displays in the
status bar.
The Open Processor continuously executes
a user-defined set of instructions called the
control program
.
This symbol signifies a Note. Notes provide
additional information or helpful hints.
This is a Caution message and indicates
that minor or moderate injury or property
damage may occur if a procedure is not
followed.
This is a Warning message and indicates
that a serious injury or a severe equipment
and property damage may occur if a
procedure is not followed.
For more information on creating flowcharts,
see Flowcharts [→92].
Notes
NK8000 MP4.81-02 service release.
For details regarding updates/modifications, see What's
new [➙ 13].
NK8000 MP4.81-01 service release.
For details regarding updates/modifications, see What's
new [➙ 13].
NK8000 MP4.81.
NK8000 MP4.80.
NK8000 MP4.70.
NK8000 MP4.60.
7
A6V10062437_a_en
30.01.2019