Symbols Used; Intended Use - Bosch Rexroth IndraControl Operating Instructions Manual

VEP 07.6/15.6 Multi Touch
NOTICE
In the event of non-compliance with this safety instruction, material damage can
occur.

3.3 Symbols Used

Pointers are displayed as follows:
This is a note.
Tips are displayed as follows:
This is a tip.

4 Intended use

The Bosch Rexroth IndraControl VEP 07.6/VEP 15.6 operator displays are pas-
sive operator and visualization terminals. They form a PC-based operator termi-
nal when used with a Bosch Rexroth control cabinet PC.
NOTICE
The operator displays may only be used as intended and with the accessories,
mounting parts and other components specified in this documentation. Compo-
nents that are not expressly mentioned must neither be attached nor connected.
The same applies to cables and lines.
Only to be operated with the component configurations and combinations ex-
pressly defined and with the software and firmware specified in the correspond-
ing functional description.
Typical areas of application of the operator display:
Handling and assembly systems
●
Packaging and food processing machines
●
Printing and paper converting machines
●
Machine tools
●
Wood processing machines
●
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P
Risk of damaging the device if not expressly sta-
ted accessories, mounting parts and other com-
ponents, cables, lines and software and firm-
ware are used.
Bosch Rexroth AG
Intended use
5/49