Bosch Rexroth IndraControl Operating Instructions Manual page 26

Bosch Rexroth AG
Interfaces
Pin Function
1 S1 (E-STOP) N/C contact 1
2 S1 (E-STOP) N/C contact 1
3 S1 (E-STOP) N/C contact 2
4 S1 (E-STOP) N/C contact 2
5 S2 (white key), N/O contact / N/C contact
6 S2 (white key) N/O contact
7 S2 (white key) N/C contact
8 S3 (black key), N/O contact / N/C contact
9 S3 (black key) N/O contact
10 S3 (black key) N/C contact
Tab. 9-8: Pin assignment X3
NOTICE
For terminal connectors use copper wire only. Tighten the screws of the screw
terminals with a torque of 2.25 lb in (0.25 Nm).
20/49
Destruction of screw terminals, insufficient con-
tact and loss of UL/CSA certificiation if no cop-
per wire is used and/or wrong tightening tor-
que.
VEP 07.6/15.6 Multi Touch
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P