Attachment To Standardized Vesa Bracket - Bosch Rexroth IndraControl Operating Instructions Manual

VEP 07.6/15.6 Multi Touch
①
Cover
②
Screws of the cover
Fig. 10-11: Position of the cover
The connecting cables are inserted into the device through rubber grommets at
the housing base. Use matching rubber grommets. The cable plugs have to be
safely screwed or engaged before closing the cover.
The cables, which are lead through a cable grommet, have to be provided with a
strain relief. This strain relief can be realized by mounting a cable tie directly be-
hind the cable grommet.

10.6.2 Attachment to standardized VESA bracket

The operator terminals can be attached to a standardized VESA sup-
port arm provided by different manufacturers.
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P
Mounting, demounting and electric installation
2
Bosch Rexroth AG
1
29/49