Bosch Rexroth IndraControl Operating Instructions Manual page 21

Vep 07.6/15.6 multi touch operator display-housing devices and built-in devices
Table of Contents

Advertisement

VEP 07.6/15.6 Multi Touch
USB 2.0 interface XF30
One USB interface acc. to the USB 2.0 specification is provided at the devices.
At the USB plug XF30, the maximum power consumption of the con-
nected device must not exceed 500 mA. If the load exceeds 500 mA,
the internal current monitoring is activated.
The same applies to housing devices for the USB 2.0 connection at
the front panel.
Fig. 9-4: USB 2.0 interface
Pin
1
2
3
4
5
Tab. 9-2: Pin assignment of the USB 2.0 interface
USB3.0 interface XF31
One USB interface acc. to the USB 3.0 specification is provided at the devices.
At the USB plug XF31, the maximum power consumption of the con-
nected device must not exceed 900 mA. If the load exceeds 900 mA,
the internal current monitoring is activated.
Fig. 9-5: USB 3.0 interface
DOK-SUPPL*-VEPXX.6MTHU-IT01-EN-P
1
2
3
Function
USB power supply (max. 500 mA)
Data -
Data +
USB ground
Shield (via metallic housing of the plug connection)
4
3
2
5
6
7
8
4
5
1
9 10
Bosch Rexroth AG
Interfaces
15/49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents